POWER AGM DUAL PURPOSE MARINE SERIES DEEP CYCLE STARTING BATTERY – NPCDP12VNS70M

Description

POWER AGM Dual Purpose Marine series batteries are an absorbed glass mat (AGM) sealed, maintenance-free battery featuring several design elements to provide optimum performance. Robust plates extend the life cycle of Power AGM Dual Purpose Batteries. A separator of glass fibres serves to isolate the positive and negative plates while acting as a pad to absorb the electrolyte. The separator is maintained under compression between plates to assure contact with plate surfaces. A computer-generated grid design is optimized for high-power density. Low calcium grid alloy reduces gas emissions and a flame arresting; one-way pressure relief vent prevents buildup of excessive pressure. Power AGM Dual Purpose Batteries are low temperature tolerant, shock and vibration resistant and have a low internal resistance for higher discharge current and higher charging efficiency. Designed with advanced battery technology, Power AGM Dual Purpose Batteries deliver dependable power with long battery life.

Special Features:

• Heat protected casing designed for under bonnet use
• Starting use capability CCA
• Cycling capability AH
• Marine style terminals to connect accessories with ease.
• Up to 3 years warranty

Valve regulated maintenance free design (AGM battery), long service life, suitable for deep cycle use:

The electrolyte is adsorbed in the AGM separator, so there is no liquid electrolyte inside the battery, this can reduce acid stratification and prolong service life. The safety valve keeps a certain pressure inside the battery, and the hydrogen and oxygen produced are compounded into water inside, which greatly reduces the water loss. Valve regulated maintenance free design (AGM battery), long service life, suitable for deep cycle use:

Special grid for deep cycle batteries:

Thickened and dense rib design, excellent corrosion resistance.

Rounded and chamfered design of the grid will not pierce the separator and cause short circuit of the battery.

Roughened surface of cast grid for tighter bonding with paste

Special grid alloy formula, great corrosion resistance

 Optimized for deep cycle conditions

Add high strength fibres to enhance active material binding force

Add 4BS crystal seed and use high temperature commix paste process to increase the 4BS skeleton content in the plate, to enhance the life of the active material.

High temperature solidify process to increase the corrosion layer on the surface of the plate grid and improve the bonding strength of the active material to the plate grid.

 Dedicated AGM separator

Tightly wrapped plate to avoid the active material shedding

Highly acid absorbing type AGM separator, which can absorb more electrolyte in the same volume and prolong service life.

Thicker separator and use high strength fibres for better resistance to pulling and puncturing, preventing breakage and punctured short circuit.

Product details

• SKU: NPCDP12VNS70M
• Volts: 12
• CCA: 710
• Amp Hour: 85
• Reserve Capacity: 150
• Length (mm): 260
• Width (mm): 168
• Height (mm): 208
• Total Height (mm): 233
• Terminal Type: MARINE TWIN
• Weight: 23 kg

Warranty Terms

The following conditions constitute abusive applications and will void the warranty:

1. Extreme Vibration applications (i.e., vibrating compactors, concrete cutters)
2. Dropping or hitting the battery
3. Overcharging battery via faulty regulator or dual battery setup not using the approved management system
4. Using Starter battery for deep cycle applications (Car Audio Systems, Trolling Motors, refrigerators)
5: Undercharging or over-discharging a battery.

The following examples may void your battery warranty
Case and cover damage:
Cracks or holes in case/cover
Missing label
Bent cover
Shaved or cut cover/case
Warped or bubbled cover

Terminal damage:
Melted, bent or broken terminals
Shaved or cut terminals
Sunken or raised terminals

Damaged Batteries.

Customers maintain the right to inspect and refuse delivery of their battery if they suspect it is damaged.

Please note that by signing for your battery delivery, you have confirmed it has arrived in good order and condition.

If the battery delivery has been left without a signature, please contact us within 2 business to lodge a return or refund request.

*Please note that currently we can only deliver this battery to metro postcodes listed below in Brisbane, Sydney, Melbourne, Perth and Darwin.

QLD: 4000-4209
4280-4347
4500-4521
9000-9464

NSW: 2745-2786
2555-2574
1001-2234

VIC: 3000-3341
3427-3442
3750-3810
3910-3920
3926-3981
8001-8627

WA: 6000-6214
6800-6997

NT: 0800-0821
0828-0834